The Bosch FLEXIDOME 4000i camera sets the RTP payload type to 35 for
H264, which causes MistServer to output "FAIL: Payload type 35 not
supported!"
The camera probably uses 35 for H264 because the ATSC standard requires
it. A/153 Part 7 states: [1]
> In addition, for RTP packets that carry AVC video elementary stream,
> the payload_type field in the RTP header shall have value 35.
The camera also sends "a=rtpmap:35 H264/90000" to explicitly map the
value 35 to H264. This is perfectly valid; although payload types 96
through 127 are recommended for dynamic use, the RTP protocol allows any
AVP payload type to be dynamically reassigned. The relevant section of
RFC 3551 states: [2]
> This profile reserves payload type numbers in the range 96-127
> exclusively for dynamic assignment. Applications SHOULD first use
> values in this range for dynamic payload types. Those applications
> which need to define more than 32 dynamic payload types MAY bind
> codes below 96, in which case it is RECOMMENDED that unassigned
> payload type numbers be used first. However, the statically assigned
> payload types are default bindings and MAY be dynamically bound to
> new encodings if needed. Redefining payload types below 96 may cause
> incorrect operation if an attempt is made to join a session without
> obtaining session description information that defines the dynamic
> payload types.
If the payload type is not recognized, assume that an rtpmap line will
follow that defines it. If in the end there is no rtpmap line, error out
in the same way whether the payload type is between 96 and 127 inclusive
or whether it is outside of that range.
[1] https://prdatsc.wpenginepowered.com/wp-content/uploads/2021/04/A153-Part-7-2012.pdf#page=14
[2] https://datatracker.ietf.org/doc/html/rfc3551#page-6
- Fix various incompatibilities and differences between Linux and Cygwin builds
- Make usrsctp an optional dependency
- Fix building without SSL
- Add new secure random bytes function, use it for websockets
- Switch to libsrtp2 v2.6.0 (currently latest release)
- Add patch that makes latest libsrtp2 build in latest Cygwin
- Add patch that makes srt build in latest Cygwin
- Correctly allow linking libsrtp2 and srt to local mbedtls version
Attempted to fix SRT push & embed links.
Push works, embed needs help
Changed capa to say UDP port as it is binding UDP
added methods to dtsc for output. added webrtc whip as input push url
added url_rel to DTSC
added "/" to the always_match and source_match for SDP and playlist to match with other protocols
updated Playlist to have source/always_match as array.
Noticed "variables_match" which is unused, what to do with it?
fix typo in -h controller text
- Added support for new "NowMs" field that holds up to where no new packets are guaranteed to show up, in order to lower latency.
- Added support for JSON tracks over all TS-based protocols (input and output)
- Added support for AMF metadata conversion to JSON (RTMP/FLV input)
- Fixed MP4 input subtitle tracks
- Generalized websocket-based outputs to all support the same commands and run the same core logic
- Added new "JSONLine" protocol that allows for generic direct line-by-line ingest of subtitles and/or JSON metadata tracks over a TCP socket or console standard input.
